Borrow Basic Carpet Washer (KIT116)

2.1L clean tank

1.7L dirty water tank

5.9m cord length

500W motor

Usage;

1. Fill the clean water tank to the max line.
2. fill the cap of the clean water tank with carpet shampoo and add to the clean water tank.
3. Secure cap and tank into machine.
4. With dry hands, plug in the machine.
5. Switch on at the side.
6. Press foot pedal at back to activate cleaning mode.
7. Press and hold solution trigger whilst pulling the machine backwards.
8. Release the trigger and push forwards.
9. Heavier soiling will need multiple passes.
10. If water runs out during cleaning, switch the machine off at the side and put it back to standing mode.
11. Switch off and unplug at the wall.
12. Release the dirty water tank catch (Labelled "DIRTY"), remove tank, empty, rinse and put back into the machine.
13. Fill clean tank if necessary.
14. Once cleaning has finished, empty, rinse and fully dry out both tanks as well as the small black sponge filter next to the dirty water tank.

Clean water tank holds enough water to clean one 5mx5m room with mild soiling.