Borrow Wheel Wrench (4-Arm) (B-190)

4-Arm Wheel Wrench for changing tyres. Fits wheel nuts of 17MM, 19MM, 21MM and 23MM.

Before changing a wheel, ensure the handbrake is on and the car is on level ground.

Loosen wheel nuts before jacking up the vehicle.

Jack up the car following manufacturer's recommended advice and spin off the loosened wheel nuts.

Remove the wheel, clean the threads and lightly oil them to prevent rusting.

Fit the spare or new wheel and partially tighten the nuts before lowering the jack.

When the car has been lowered, fully tighten the wheel nuts.

Always tighten the nuts in a diagonal sequence - refer to manufacturer handbook for additional torque settings.

Keep a suitable screwdriver or lever in your vehicle for removal of wheel trims if present on your vehicle.