Borrow 500w Variable Speed Laser Jigsaw FMTC500LJS

500w Variable Speed Laser Jigsaw FMTC500LJS

WHAT IT DOES

Jigsaws can cut straight lines, but are best used for curves.  They can cut all sorts of different types of material, depending on the blade used.

ABOUT THIS TOOL

• Variable speed Jigsaw

• Full 1" stroke length

• Electronic speed control maintains the speed consistently for various materials

• Bevel cuts up to 45º Left or Right.

• Accepts universal fitting (T) jigsaw blades

  
  

  
  

• To change the blade on a Wickes 800W Pendulum Jigsaw with Laser Guide, you can follow these steps:

  Unplug the jigsaw.

  Turn the jigsaw upside down and rotate the ring on the blade holder counterclockwise to open it

  Insert the blade into the blade holder slot with the teeth facing forward

  Release the ring to clamp it over the blade

  Push the blade back into the holder to make sure it's locked

  Ensure the blade's edge is in the support roller's groove 

  To remove the blade, you can:

  Hold the blade

  Rotate the ring counterclockwise

  Lift the blade out 

  Here are some tips for using a jigsaw:

  Use a blade that's suited to the material and the quality of cut you want

  Protect your eyes because the blade will spring out

  Don't point the jigsaw at people because the blade teeth are very sharp 

  
  

  SAFETY INFORMATION & PPE

  Safety glasses – Essential

  Dust mask – Essential

  Ear protection – Recommended