Borrow Workzone 300w Multifunction Tool corded

Workzone 300w Multifunction Tool is an oscillating tool

Step-by-Step Guide

Safety First: Always wear protective eye goggles and a dust mask to protect your eyes and lungs from dust. Ear protection is also recommended due to the noise. 

Attach the Accessory: Select the appropriate blade or accessory (e.g., wood blade, sanding pad, scraper) for your material and task and attach it to the tool, using the toolless lever if your model has one. 

Power Up: Insert a battery if it's a cordless model, or plug in the corded tool. 

Adjust Speed: Use the speed control to set the appropriate speed for your material; a lower speed is for less vibration and a higher speed is for more intense oscillation. 

Start the Cut: Grip the tool firmly with both hands to maintain control and stability. 

Use with Technique: Begin your cut, using the corner of the blade to establish a clean line before plunging through. Keep your hands away from the work area to avoid injury. 

Finish the Task: Once the task is complete, turn off the tool, wait for the attachment to stop moving, and then remove it.