Borrow Pressure Washer BP-0746
All items from Benthyg Penarth
IMPORTANT: Please read the User Manual before use with particular attention to all safety warnings and guidance.
WARNING: Only operate the device via a fault current protection switch (maximum 30 mA) also known as an RCD.
Ensure hose is connected and water is ON and flowing through the machine for a minute or two (ie water coming out of the nozzle when trigger is pressed) before the power is switched on. This clears any air pockets in the hoses and machine itself. If there are air pockets still remaining, the machine detects this and may not run until they are cleared.
WARNING: Only operate the device via a fault current protection switch (maximum 30 mA) also known as an RCD.
Ensure hose is connected and water is ON and flowing through the machine for a minute or two (ie water coming out of the nozzle when trigger is pressed) before the power is switched on. This clears any air pockets in the hoses and machine itself. If there are air pockets still remaining, the machine detects this and may not run until they are cleared.
